ZOLL M Series Defibrillator System Interconnect Board 9301-0306-03 9300-0306-03
▷ System Interconnect Module
The system interface PWBA receives signals from the main board and controls the operation of the tape recorder and PCMCIA functions.
▷ Removing the System Interconnect Board
Setup
1. Remove the Front Panel Assembly.
2. Remove the Upper Housing Assembly.
3. Remove the System Board.
4. Remove the Battery Interconnect Board.
5. Remove the High Voltage/Charger module.
6. Remove the clear plastic print head isolater.
7. Remove the motor cable, cable print head and paper sensor cable.
To reinstall the System Interconnect Board:
1. Install the laminate cables and keepers.
2. Ensure that the PCMCIA slots with gaskets are located to the right rear of the board and seated properly.
Step 1: Remove the clear plastic head isolater.
Step 2: Remove two screws from each side of the System Interconnect Board.
Step 3: Disconnect the cables and lift the System Interconnect Board out of the unit.
▷ Specification of ZOLL M Series Defibrillator System Interconnect Board 9301-0306-03 9300-0306-03
| Product name | ZOLL M Series Defibrillator System Interconnect Board 9301-0306-03 9300-0306-03 |
| brand | ZOLL |
| Part no | 9301-0306-03 9300-0306-03 |
| Application | ZOLL M Series Defibrillator |
| warranty | 90 days |
| MOQ | One piece |
▷ About ZOLL M Series Defibrillator
The ZOLL M series includes a DC defibrillator capable of delivering up to 360 Joules (200 Joules for biphasic units). It can be used in synchronized mode to perform synchronized cardioversion using the R wave of the patient's ECG as a time reference. The device uses paddles or disposable pre-gelled MFE pads for defibrillation.
▷ FAQ
1. What is the shipping cost?
The shipping fee depends on the weight and volume of the package. We would be grateful if you could confirm the quantity of the product. We will then help you check the shipping cost
2. Do you ship by Air?
Yes, we ship by DHL, Fedex or UPS, it takes about 5-7 working days to reach you. The batteries are supplied with a special liner that lasts longer.
3. When can I receive my order?
It usually takes about 3-5 business days to process your order and about 5 business days to arrive at your site.
4. What are the payment terms?
We must receive full payment before shipping. All our customers do this. Please share your understanding
Thank you so much for your attention .If you're interested in System Interconnect Board 9301-0306-03 9300-0306-03 For ZOLL M Series Defibrillator ,feel free to contact us .Thank you .
Product Tags:
|
|
System Interconnect Board 9301-0306-03 9300-0306-03 For ZOLL M Series Defibrillator Images
|
